Materials:
· Inexpensive memo board
· 1 1⁄4 yards fabric of your choice
· Iron and ironing board, optional
· Fabric scissors
· Staple gun and staples
· 5 yards seam binding or grosgrain ribbon, 5⁄8 inch wide, color of your choice
· Covered-button kit with 3⁄4-inch buttons or re-purpose the buttons as I did
· Wire cutter
· Frame hanging wire
· Fabric for backside of board {muslin or cotton sheeting}
· ½ grossgain ribbon to cover staples on fabric on backside of board.
· Fabric glue
1. Remove and discard the buttons and ribbons from the original memo board. Note: If you are using a template board you made, be sure to wrap it in batting and then fabric. I remembered the ribbon pattern as I drew it on a piece of paper so I would know how to place my ribbon {a large "X" and 4 parallel pieces}.
2. Iron your fabric to remove any wrinkles, if necessary. Lay the fabric facedown on a flat surface {if using burlap, you will need to double the fabric so it is not see through}; lay the memo board facedown over the fabric. Cut excess fabric so there is approximately 2 inches fabric overhang on each side of the memo board.
Wrap the fabric to the back of the board, stretching the fabric so it is tight. Using the staple gun, secure one staple at the center of each side.
3. Wrap fabric over diagonally at each corner, and secure with a staple. Neatly fold in the remaining fabric and staple in place. Finish stapling the fabric around the memo board.
4. Turn the memo board face-up. Cut two ribbon pieces a few inches longer than the distance from corner to corner diagonally. Wrap one end to the back, and staple in place. Stretch the ribbon tight to the opposite corner, wrap the end to the back, and staple. Repeat with the second ribbon, forming an “X”. Add four more ribbons parallel to the first ones {this makes a diamond shape when looking at the “X”}, stretching them tight from the mid-points of each side.
I used two different colors of grossgrain ribbon, but you could use all the same color.
5. Insert a staple at each ribbon intersection. I used scraps of 2 inch wide silk ribbon and made five covered buttons, hand-stitching the ribbon to cover the buttons. I attached the buttons with fabric glue hiding the staples at each ribbon intersection. Furniture brads would be another great idea. Because I was gluing buttons on {used fabric glue so they don't pop off like they would if I used hot glue}, I covered the staples at each ribbon intersection with the finished button.
6. I covered the back of the board with fabric I had from a cotton sheet. I used pinking shears to cut it so it would not fray, stapled it in place, and covered the staples with 2 inch blue grossgrain ribbon {I took a photo of the fabric and did not take one of the ribbon covering the staples}. I glued the ribbon in place with permanent fabric glue. The tape on the unfinished board back was to cover where the staples poked through.
Voila! Here's the finished French memo board. {I put the buttons in place and snapped a photo prior to gluing them down}.
Sorry for the lighting in the photos looking so yellow. Batteries were close to dying and I took the photos the evening I made the board as opposed to daylight, which would have made for better pictures! You get the idea...
Pin It
As for our niece, the graduate, she loved it!
Remember, keep it simple, keep it crafty, keep it thrifty, and keep it chic!
I'm linking up to these parties this week. Stop by for some creative inspiration. I'll be adding new party links everyday:
Blue Cricket Design's Linky Party Button is not working so here is the link to her post:
http://www.bluecricketdesign.net/2011/06/show-and-tell-linking-party-5.html
